For the UI-VIEW32 setup I using 3 ports in AGWPE.

Port 1 at 300 bauds for HF, Port 2 at 1200 bauds for VHF and a internal (non radio port) called LoopBack.

PTT for the transceivers, work in COM1, and the wire on a lineout soundcard send audio at 300 bauds HF for a left chanel while for the right chanel the audio output  is 1200 bauds for VHF.

In the example I using  COM1 for  PTT radio ports and  LPT3 port for Loopback because it not need transceiver.

First you  must create 3 ports in the AGWPE, with the following files: AGWPE.INI, PORT0.INI, PORT1.INI and PORT2.INI.

AGWPE.INI

[LANGUAGE]
LANGUAGE=14346

[TNC]
GMT=1
MONITORFORMAT=0

[VERSION]
MAJOR=2005
MINOR=127

[MAIN]
PORTS=3
DIALUP=0
TCPIP=0

[AUTO]
MAXMAXFRAME=2
MINMAXFRAME=1

[TCPIPINTERCONNECT]
ENABLE=1
PORT=8000
SECURITYLEVEL=2
LOG=0

[HTTPIF]
ENABLE=0
PORT=80
LOGIN=
PASSWORD=

PORT0.INI

[COMMUNICATION]
CHANNELSPEED=300
SENS_THRESHOLD=4
SOUNDCARD=0
FULLDUPLEX_DRIVER=0
PORT=COM1:
BAUD=1200

[TNC]
TYPE=SoundCard
KISSSUBTYPE=KISS
INITKISS1=
INITKISS2=
INITKISS3=
EXITKISS=1
KISSID=0
KISSIDPORT2=16
KISSIDPORT3=0
KISSIDPORT4=0
FREQUENCY=HF_7.040 MHz
ONAIR=0
MULTIPORT=2
AUTO=1
PERSIST=128
SLOTIME=15
TXTAIL=4
TXDELAY=30
RETRIES=10
MAXFRAME=1
TIMER1=12
TIMER2=48
TIMER3=120
SOFTDCD=0
FULLDUPLEX=0
SDCDTHRESHOLD=64
DAMASUPPORT=1
EAX25SUPPORT=1

[DUALPORT]
SECONDPORT=1

[VOLUME]
LEFT_TX_MAIN=0
RIGHT_TX_MAIN=0
LEFT_TX_WAVE=0
RIGHT_TX_WAVE=0
LEFT_RX=59367
RIGHT_RX=59367
RX_ID=327681
SETONSTART=1
RESTOREONEXIT=0
LEFT_TX_MAIN_PREV=0
RIGHT_TX_MAIN_PREV=0
LEFT_TX_WAVE_PREV=0
RIGHT_TX_WAVE_PREV=0
LEFT_RX_PREV=59367
RIGHT_RX_PREV=59367

PORT1.INI

[COMMUNICATION]
CHANNELSPEED=1200
SENS_THRESHOLD=4
COMBASE=300
PORT=COM1:
BAUD=9600

[DUALPORT]
SERIALPORT=DISABLE
MAINPORT=0

[TNC]
TYPE=SoundCard
ONAIR=0
FREQUENCY=VHF_145.030 MHz
KISSID=16
MULTIPORT=2
KISSSUBTYPE=KISS
AUTO=1
PERSIST=128
SLOTIME=10
TXTAIL=5
TXDELAY=35
RETRIES=10
MAXFRAME=1
TIMER1=9
TIMER2=6
TIMER3=120
SOFTDCD=0
FULLDUPLEX=0
SDCDTHRESHOLD=64
DAMASUPPORT=1
EAX25SUPPORT=1

PORT2.INI

[TNC]
TYPE=LoopBack Port
KISSSUBTYPE=KISS
INITKISS1=
INITKISS2=
INITKISS3=
EXITKISS=1
KISSID=0
KISSIDPORT2=0
KISSIDPORT3=0
KISSIDPORT4=0
FREQUENCY=Loopback
ONAIR=0
MULTIPORT=1
AUTO=0
PERSIST=190
SLOTIME=5
TXTAIL=4
TXDELAY=10
RETRIES=3
MAXFRAME=7
TIMER1=8
TIMER2=3
TIMER3=120
SOFTDCD=0
FULLDUPLEX=0
SDCDTHRESHOLD=64
DAMASUPPORT=1
EAX25SUPPORT=1

[COMMUNICATION]
PORT=LPT3:
BAUD=9600

Now AGWPE setup is finished and you need install UI-VIEW32, and go to Setup.

If you like a present config you can download a .zip file clicking  here.

If you need to change a COM, please edit a PORT0.INI and PORT1.INI and modify the entry  PORT=COM1: for your desired COM free.

Now setup UI-VIEW for work with AGWPE:

When agwpe and UI-VIEW are working fine please press a F7 key for check the AGWPE config in your UI-VIEW:

Now setup a station, latitude, longitude etc. info:

In the Status Text you can write any text of your station, or tag a  Send best DX for send a best Dx station heard in your radio ports.

If you Send a best Dx, cannot send Status text or reverse.

You can add other info in the Station_Information, for example, antena, transceiver, e-mail, etc.

The Miscellaneous setup:

UI-VIEW working as  APRS and PACKET DIGIPEATER.

In the following example, Digipeater is enabled, and all trafic from RF (APRS or PACKET) to xxx via CX2SA-8 are digipeated for the UI-VIEW.

Frames from port 1 are digipeated on port 2, frames from port 2 to port 1and all loopback port in both radio ports.

RETURN